The above land ponds are a popular selection of summer entertainment for the backyard, which is estimated throughout the United States that these ponds are friendly alternatives to the budget of these ground ponds, installing are relatively easy to ease, and are available in different shapes and lifestyle.
Although many new models are equipped with built -in filtration systems or easy -to -run drain valves that make maintenance easier, routine maintenance is still necessary. Bouncing care can also cause cloudy water, alkali construction, or health and safety risks. Fortunately, the bank does not have to break the ground pool to take care of the top. On average, the DIY pool maintenance cost is between $ 80 and 0,050, while hiring a professional service can go up to $ 50 to $ 100 per hour.
Whether you own the first time the pond or just need a refresher before the swimming season, here you need to know about the recovery of the above pools to keep your pond clean, clean, and all summer use.
Daily maintenance work
Swimming pool above ground is not difficult, but if you pay regular attention to maintaining your pond and its water quality, it works better. To stay beyond potential problems, do it daily.
1. Check the PHO’s level level.
It is important to maintain the right chemical balance to clean, clean, clean, and safely protect your pond water. Chlorine helps eliminate bacteria, alkaline and other microorganisms, but its effectiveness can fall with sun exposure, heavy use or rain. Daily testing with the pool test kit will ensure that chlorine levels will remain within 2.0 to 4.0 parts per million (PPM).
Along with chlorine, it is important to check the level of water pH, which should be between 7.4 and 7.6. Balanced PH not only keeps water comfortable for swimmers, but also protects your pond equipment from corrosion and helps chlorine more efficiently. If the pH is very low, a shared fix is to add the PH -encryption such as baking soda.
2. Skim to water.
Even with a working filtration system, leaves, insects and other debris can be constructed rapidly on the water level, especially if your pond is close to trees or plants. Leaving daily water from the pond trap helps prevent the debris from drowning down or preventing your filter. This is a fast task that makes a long journey to keep your pond clean and invited.
3. Run pump at least 8 hours a day.
Daily pump running is an important part of the pond maintenance. The pump is an important task to circulate pool water, and this movement helps keep the pool clean. This is one of the reasons you want to choose the best pool pump.
The circulating water helps to extend the dirt and debris to the scammer baskets and reduce the growth opportunities. Since the pumps cannot rotate your water at all, use a pool brush or other long tools to provoke water in poor flow spots.
Although you do not need to run your pool pump permanently, running for at least 8 hours every day is a good rule of thumb. However, some manufacturers may have different recommendations, so it is always a good idea to consult a user manual.
4. Clean the pump and pool scammer baskets.
When you are thinking about maintaining the pond, don’t forget to vacate the scammers and pump baskets daily. Scammers pull leaves and other small debris floating on the water level. The scammer holds debris in the basket, and prevents it from finding a way to the pump or filter. Eliminating these baskets as part of the ground pool care routine you above will keep your pool clean and help prevent slaves.
In addition to the scammer baskets, you should check and vacate the pump compartment of your top ground pool every day. The basket contains debris that passed it through the scammer baskets or was pulled through the pond drains. Emptying this basket daily can prevent the debris from going into the pump, preventing the amplifier and reducing the amount of water flowing through the system. Before emptying the basket, remember to turn off the pump.
Weekly recovery work
The above ground pond cleaning also includes some tasks that you need to complete only once a week, such as vacuuming and trauma for water. You would also like to pay weekly attention to the pool filter during the swimming season.
1. Pond vacuum.
Even with regular skimming, dirt and debris can live under your top ground pool and its footsteps. Emptying the pond once a week helps keep the floor clean and prevents the construction that can lead to the water of the alkali or cloudy pond. You can use the top ground pool vacuum or automatic cleaner in terms of your setup and preferences. In any way, permanent vacuuming helps your pond look the best and makes the swimming water healthy.
2. Shrink the water of the ponds of your above.
Shocking the upper ground pond on a weekly basis is another important aspect of care. Pool shock treatment helps to remove pollutions like bacteria and alkali from water. The pond shock is a powder form of chlorine that increases the level of “free chlorine” to the water level. Shocking the pond after several people’s swimming after the rain storm or recently swimming in the pond can be particularly beneficial.
You should shoot your pond in the evening. Otherwise, sunlight can break chlorine before it is fully capable. After adding trauma to the pond, turn the pump and let it run for 8 or more hours. Avoid swimming in the pond until the next day.
3. Clean your pool filter.
Whether you have sand, cartridges, or dietomis Earth (DE) pool filters, make sure it is regularly cleaned. The pool filter removes particles from water, which makes it clean and safe for swimming. Without proper cleaning, water can be contaminated in the pond. It is also possible to close the filter, which causes a major problem.
Check the manufacturer’s recommendations and clean your filter regularly. In most cases, you should remove the cartridge filters and clean them with water hose once a week. Change them every 1 to 2 years. Sand and de -filters should be washed almost once a month and should be replaced every 3 to 5 years.
If you need a ground pool filter above, consider the Intex Crystal Clear Sand Filter Pump, which is the top choice in our guide for the best pond filters.
Other works of recovery
Possible to keep your top ground pond in good shape, focus on its structure to remove the potential leak. If you do not use the pool during cold months, make sure it is properly made winter.
1. Clean and patch the pool liner.
Your liner works more than stopping water: it helps to save the pond structure. Over time, the remains of the alkali, gram and sunscreen can be built, especially along the water line on the liner. Cleaning it gently with a soft brush or sponge helps prevent stains from stains every few weeks and your pond looks fresh.
Regular inspection of liner for small tears or punctures is also a good idea, which can be leakage. If you see any damage, immediately using the violinal repair kit for the top ground ponds. Patch. Living in the upper part of small problems can help you avoid major problems on the road and increase the life of the pond.
2. Make the pond properly in winter.
Leaving the land ponds filled with water in the winter, instead, is better. If you live in an area where you cannot swim all year long and the pond must be brought to the winter, doing it properly will ensure that it is in a safe and useful form next year. Although you can pay the Pay Pay to bring the local recovery service to the winter, you can also save money yourself.
To bring the pond to the winter, start cleaning with full cleaning. After cleaning the pool, make sure the levels of chlorine and pH are balanced and add to the chemicals in the winter. Then, safely remove the pump, filter, scammers, pool lines, top ground pool steps, and any other accessories and equipment safely. Finally, cover the pool using air pillows and pond cover. The air pillow will hold the cover, and prevents it from watering in the pond.
3. Save your home from leaks.
Although it is easy to focus on maintaining your own pond, it is important to think about how your pool setup can affect your home. If the pool is leaked or flowed, the water can suffer from the landscape around the top ground pond. It can even reach the foundation of your home and enter the basement or crawl. These events can cause expensive damage, mold and mildew.
Consider implementing a simple pump to reduce the risk of eliminating pool water in the basement of your home. A simple pump foundation can help redirect water away during heavy rains or unexpected leakage. It is also smart to position your pond according to local building codes and protective guidelines, which often requires a certain distance from your home structure to allow proper drainage.
Finally, regularly check the ground around the pond for pond water or cutting symbols. Now taking some precautions can help protect your home and give you peace of mind in the pond season.
Lush and healthy lawn of LOY you need everything
